Cover a diy fireplace mantel can significantly reduce the value of your home, but if the fireplace is not in operating condition and it cannot be repaired, perhaps the best is closure. On the other hand, there is no need to hire someone to block your fireplace. It is possible to cover the opening with bricks that match your existing fireplace, or simply apply a plaster cast to give a uniform appearance.
It removes part of the diy fireplace mantel this framework is composed of wood, metal or tile around the opening. Frames are usually installed with screws or nuts. If these parts have suffered corrosion over time, you might have to pull or pry out, rather than remove them. Frames of stone or brick will have to be removed with a hammer or chisel.
12 Photos Gallery of: How to DIY Fireplace Mantel
Measure the opening of the fireplace. It is measured using square meters as a unit, if you do plan to use diy fireplace mantel bricks to fill the hole. Multiply by 60 measures to determine the number of bricks you will need to fill the opening, and purchase at least an additional five per cent to this value. Be sure to make one of these bricks of ventilation, in order to allow the circulation of air in your fireplace.