Coat rack hooks – While there are no fixed rules or regulations to hang a wall hanger, logic comes into play: The rack should be at reasonable scope without a stool, and should also be high enough to keep the layers touching the ground. The room where the rack is installed, and the height of the most likely to use the frame are key factors when choosing how high to hang your coat rack. No matter how high to hang a coat rack hooks, even with nothing hanging on their hooks, it can be a given weight. The support board or flat piece that contains all the hooks on the device requires sturdy support on the wall hanging; otherwise, the rack can fall apart. Secure the structure of wall studs, if available, for maximum security, no matter how heavy coats hanging from the rack. If a stud is not available, install at least two resistant wall anchors, or if the frame is 2 meters long. Choose nominal anchor for heavy loads to ensure the grid is good even under load. A rack layer averages about 6 feet tall with inside hooks mounted 12 to 18 cm below the top of the foot. Installed on a wall 5 feet, the average adult and a child of school age are able to reach the coat rack hooks on a rack mounted on the wall. This height, slightly adjusted up or down as needed allowing plenty of space to hang under wraps as well, to ensure that even a long coat off the ground.